Photoelectron spectroscopy and electronic structure calculations of d1 vanadocene compounds with chelated dithiolate ligands: implications for pyranopterin Mo/W enzymes

Gas-phase photoelectron spectroscopy and density functional theory have been used to investigate the electronic structures of open-shell bent vanadocene compounds with chelating dithiolate ligands, which are minimum molecular models of the active sites of pyranopterin Mo/W enzymes. The compounds Cp2V(dithiolate) [where dithiolate is 1,2-ethenedithiolate (S2C2H2) or 1,2-benzenedithiolate (bdt), and Cp is cyclopentadienyl] provide access to a 17-electron, d1 electron configuration at the metal center. Comparison with previously studied Cp2M(dithiolate) complexes, where M is Ti and Mo (respectively d0 and d2 electron configurations), allows evaluation of d0, d1, and d2 electronic configurations of the metal center that are analogues for the metal oxidation states present throughout the catalytic cycle of these enzymes. A "dithiolate-folding effect" that involves an interaction between the vanadium d orbitals and sulfur p orbitals is shown to stabilize the d1 metal center, allowing the d1 electron configuration and geometry to act as a low-energy electron pathway intermediate between the d0 and d2 electron configurations of the enzyme.     

The Bending-Gradient Theory for Thick Plates: Existence and Uniqueness Results

This paper is devoted to the mathematical justification of the Bending-Gradient theory which is considered as the extension of the Reissner-Mindlin theory (or the First Order Shear Deformation Theory) to heterogeneous plates. In order to rigorously assess the well-posedness of the Bending-Gradient problems, we first assume that the compliance tensor related to the generalized shear force is positive definite. We define the functional spaces to which the variables of the theory belong, then state and prove the existence and uniqueness theorems of solutions of the Bending-Gradient problems for clamped and free plates, as well as for simply supported plates. The obtained results are afterward extended to the general case, i.e., when the compliance tensor related to generalized shear forces is not definite.     

Crystal growth,electrical and photophysical properties of Tl<Subscript>2</Subscript>S layered single crystals

The Tl₂S compound was prepared in a single crystal form using a special local technique, and the obtained crystals were analysed by X-ray diffraction. For the resultant crystals, the electrical properties (electrical conductivity and Hall effect) and steady-state photoconductivity were elucidated in this work. The electrical measurements extend from 170 to 430 K, where it was found that σ _⊥ = 8.82 × 10⁻⁵ Sm⁻¹ when current flow direction makes right angle to the cleavage plane of the crystals. In the same range of temperatures, it was found that σ _‖ = 4.73 × 10⁻⁵ Sm⁻¹ when the current flow is parallel to the cleavage plane. In line with the investigated range of temperatures, the widths of the band gaps were calculated and discussed as also the results of the electrical conductivity and Hall effect measurements. In addition, the anisotropy of the electrical conductivity (σ _⊥/σ _‖) for the obtained crystals was also studied in this work. Finally the photosensitivity was calculated for different levels of illumination as a result of the photoconductivity measurements, which showed that the recombination process in Tl₂S single crystals is a monomolecular process.      

Cellular rubber: Dependency between relaxation time and pretreatment

In this contribution we investigate experimentally a porous carbon-filled rubber. The main focus is on the dependency of the mechanical behaviour using different pretreatments. Therfore, cyclic tests and relaxation tests with different pretreatment are performed. (© 2009 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Simultaneous measurement of proline and related compounds in oak leaves by high-performance ligand-exchange chromatography and electrospray ionization mass spectrometry for environmental stress studies

A mass spectrometer was coupled to high-performance ligand-exchange liquid chromatography (HPLEC) for simultaneous analysis of stress associated solutes such as proline, hydroxyproline, methylproline, glycine betaine and trigonelline extracted from leaves of drought stressed oaks and an internal standard namely N-acetylproline. Methanol/chloroform/water extracts were analyzed using an Aminex HPX-87C column and specifically quantified by the positive ion mode of an electrospray ionisation-mass spectrometry (ESI-MS) in single ion monitoring (SIM) mode. The recovery of N-acetyl proline added to oak leaf extracts ranged from 85.2 to 122.1% for an intra-day study. Standard calibration curves showed good linearity in the measured range from 0.3125 to 10 μmol L⁻¹ with the lowest correlation coefficient of 0.99961 for trigonelline. The advantages of this alternative procedure, compared to previously published methods using fluorescence or amperometric detections, are the simultaneous and direct detection of osmoprotectants in a single chromatographic run, a minimal sample preparation, a good specificity and reduced limits of quantification, ranging from 0.1 to 0.6 μmol L⁻¹. Fifty-six days of water deficit exposure resulted in increased foliar free proline levels (2.4-fold, P < 0.001, 155 μmol g⁻¹ FW) and glycine betaine contents (2.5-fold, P < 0.05, 175 μmol g⁻¹ FW) of drought stressed oak compared to control.     

Safety and Quality Aspects of Acrylic Monomers

Summary : Acrylic monomers are important intermediates for the chemical industry. Especially acrylic acid (AA) is the basis for various reactions, such as polymerizations and esterifications and is, therefore, responsible for high product diversity. Spontaneous polymerization is a safety problem during the transportation and storage of acrylic monomers. In the production process, polymerization leads to blockages in the apparatus. For the prevention of these issues, special stabilizer systems are used such as hydroquinone monomethyl ether (MeHQ)/oxygen and phenothiazine (PTZ). The reactions of these stabilizer systems are not well understood at the moment. Therefore a lot of expertise and experience are necessary to guarantee safe handling. In this paper some methods for the investigation of stability related reaction kinetics are presented. A better comprehension of the mechanism of the polymerization inhibition is generated by the kinetic simulation with these data.     

Real Interpolation of Sobolev Spaces Associated to a Weight

We hereby study the interpolation property of Sobolev spaces of order 1 denoted by \(W^{1}_{p,V}\), arising from Schrödinger operators with positive potential. We show that for 1?≤?p ₁?p?p ₂?q ₀ with p?>?s ₀, \(W^{1}_{p,V}\) is a real interpolation space between \(W_{p_1,V}^{1}\) and \(W_{p_2,V}^{1}\) on some classes of manifolds and Lie groups. The constants s ₀, q ₀ depend on our hypotheses.     

Facilitating access to the most easily ionized molecule: an improved synthesis of the key intermediate, W2(hpp)4Cl2, and related compounds

A far superior synthesis is reported for W(2)(hpp)(4)Cl(2), a key intermediate in the synthesis of the most easily ionized closed-shell molecule W(2)(hpp)(4) (hpp = the anion of the bicyclic guanidine compound 1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-a]pyrimidine). At 200 degrees C, the one-pot reaction of the air-stable and commercially available compounds W(CO)(6) and Hhpp in o-dichlorobenzene produces W(2)(hpp)(4)Cl(2) in multigram quantities with isolated yields of over 90%. At lower temperatures, the reaction can lead to other compounds such as W(Hhpp)(2)(CO)(4) or W(2)(mu-CO)(2)(mu-hpp)(2)(eta(2)-hpp)(2), which are isolable in good purity depending upon the specific conditions employed. These compounds provide insight into the reaction pathway to W(2)(hpp)(4)Cl(2) and W(2)(hpp)(4). Two additional derivatives, W(2)(hpp)(4)X(2) where X is PF(6)(-) or the anion tetrakis[3,5-bis(trifluoromethyl)phenyl]borate (TFPB), have also been synthesized and structurally characterized. A comparison of the electrode potentials of W(2)(mu-CO)(2)(mu-hpp)(2)(eta(2)-hpp)(2) and the di-p-anisylformamidinate analogue shows that oxidation of the hpp compound is significantly displaced (1.12 V) and shows that the bicyclic guanidinate ligand is considerably better than the formamidinate anion at stabilizing high oxidation states. A differential pulse voltammogram of W(2)(hpp)(4)(TFPB)(2) in THF shows two reduction processes with an E(1/2) of -0.97 V for the first and -1.81 V (vs Ag/AgCl) for the second. DFT calculations on the W(2)(hpp)(4)(2+) units in W(2)(hpp)(4)X(2) compounds show that the metal-metal bonding orbitals are destabilized by the axial ligands, which accounts for significant variations in the W-W distances. The low-energy gas-phase ionizations of W(2)(hpp)(4) are also reported and discussed.     

Vibronic coupling in organic semiconductors: the case of fused polycyclic benzene-thiophene structures

The nature of vibronic coupling in fused polycyclic benzene-thiophene structures has been studied using an approach that combines high-resolution gas-phase photoelectron spectroscopy measurements with first-principles quantum-mechanical calculations. The results indicate that in general the electron-vibrational coupling is stronger than the hole-vibrational coupling. In acenedithiophenes, the main contributions to the hole-vibrational coupling arise from medium- and high-frequency vibrations. In thienobisbenzothiophenes, however, the interaction of holes with low-frequency vibrations becomes significant and is larger than the corresponding electron-vibrational interaction. This finding is in striking contrast with the characteristic pattern in oligoacenes and acenedithiophenes in which the low-frequency vibrations contribute substantially only to the electron-vibrational coupling. The impact of isomerism has been studied as well.     

Potentiometric anion selectivity of polymer-membrane electrodes based on cobalt, chromium, and aluminum salens

Metallo-salens of cobalt(II) (Co-Sal), chromium(III) (Cr-Sal), and aluminum(III) (Al-Sal) are used as the active ionophores within plasticized poly(vinyl chloride) membranes. It is shown that central metal-ion plays a critical role in directing the ionophore selectivity. Polymer-membrane electrodes based on Co-Sal, Cr-Sal, and Al-Sal are demonstrated to exhibit enhanced responses and selectivity toward nitrite/thiocyanate, thiocyanate, and fluoride anions, respectively. The improved anion selectivity of the three ionophore systems is shown to deviate significantly from the classical Hofmeister pattern that is based only on ion lipophilicity. For example, optimized membrane electrodes for nitrite ion based on Co-Sal exhibit logK(Nitrite,Anion)(pot) values of -5.22, -4.66, -4.48, -2.5 towards bromide, perchlorate, nitrate, and iodide anions, respectively. Optimized membrane electrodes based on Co-Sal and Cr-Sal show near-Nernstian responses towards nitrite (-57.9+/-0.9 mV/decade) and thiocyanate (-56.9+/-0.8 mV/decade), respectively, with fast response and recovery times. In contrast, Al-Sal based membrane electrodes respond to fluoride ion in a super-Nernstian (-70+/-3 mV/decade) and nearly an irreversible mode. The operative response mechanism of Co-Sal, Cr-Sal, and Al-Sal membrane electrodes is examined using the effect of added ionic sites on the potentiometric response characteristics. It is demonstrated that addition of lipophilic anionic sites to membrane electrodes based on the utilized metallo-salens enhances the selectivity towards the primary ion, while addition of cationic sites resulted in Hofmeister selectivity patterns suggesting that the operative response mechanism is of the charged carrier type. Electron spin resonance (ESR) data indicates that Co(II) metal-ion center of Co-Sal ionophore undergoes oxidation to Co(III). This process leads to formation of a charged anion-carrier that is consistent with the response behavior obtained for Co-Sal based membrane electrodes.